QUOTE

Enter your details and we will get straight back to discuss your requirements.

Electrofusion Fittings

Georg Fischer

Westwood Pipelines are the major UK distributor for the Georg Fischer Elgef Plus range of electrofusion fittings.

Since the beginning of 2003 when Westwood Pipelines first began trading these fittings have been an integral part of our range. The fittings are available from 20mm to 630mm diameters available in black PE100 SDR11 and SDR17, with WRAS approval for use on potable drinking water pipelines. The range has recently expanded to now offer a range of electrofusion branch saddles from 250-630mm mains sizes with 90mm, 110mm and 125mm outlet sizes.

The Elgef Plus fittings have already been used on projects such as the new Wembley Stadium and more recently by Yorkshire Water. All these products including long spigot fittings are available from Westwood Pipelines Ltd.

Long Spigot Fittings

  • 20mm up to 400mm
  • 10Bar and 16Bar Available
  • Tees, Elbows (45 & 90Deg), Stub Flanges, Reducers

Couplers

20 to 63mm
  • Integral Clamps for extra support when welding Coiled pipe.
75 to 400mm
  • 16Bar Working Pressure available
  • 315 to 400mm couplers come complete with Active welding by GF. Allowing the coupler to actively reduce gaps created by oval pipe
160 to 500mm
  • 10Bar Working Pressure, helps reduce cost when working at lower pressures
  • 315 to 500mm couplers come complete with Active welding by GF. Allowing the coupler to actively reduce gaps created by oval pipe
560 & 630mm
  • 10Bar Working Pressure
  • Specialist Equipment and Training Required
  • Double sided couplers (two welds per coupler)
  • Mechanical scraper and re-rounding tools are required and on available on request 
  • NO Pre-heat required

End Caps

  • 20 to 250mm

Elbows - 45 and 90 Deg

  • 20mm to 250mm

Equal Tees

  • 20mm to 250mm

Transition Fittings - 20 to 63mm

  • Male & Female connections
  • Can be supplied separately or as a complete kit (including Coupler, Elbow, Tee, Reducer)
  • Loose Nut type available
  • Available in Brass, Stainless 1.4305 transition ends

Branch Saddles

  • Available with 110mm to 630mm Saddle size
  • Available with 90,110,125mm Branch sizes (Subject to Saddle Size)
  • Allows installer to tee off mainline without cutting in a tee section.
  • 16Bar Rated

Branch Saddle Modular System

  • Consists of Branch Saddles with a 63mm outlet
  • Connection in to outlet of the following:
    • 360Deg Rotating Tapping Tee
    • Pipe sections
    • Reducers
    • Transition fittings
    • PE Ball Values
    • Value Tapping Tees
  • Reduce stock holding – 31 Individual Parts but over 500 combinations

Click here to receive our latest price list.

Back To Product Categories

website design by Llama Digital

© Westwood Pipelines Ltd 2008